Search This Supplers Products:plastic injection moldplastic injection partsRapid prototype
Tooling developing Procedure--5
Cutting Tooling Noticd
|
Cutting Tooling Steel Notice | |||||||||||||
| P.O | Tooling No. | Resin | Color | Shrinkage Rate | Tooling core | Surface of Cav. | Surface of Core | Full Name of 2D Drawing | Full Name of 3D Drawing | Date for 2d Generating | Date for 3d Generating | Date for GA generating | Longxiang T1 Date | |
| PO --- | LXGL---- | PE | black |
3% | P20 | Sand
Blast |
Sand
Blast |
G | G | 2018/1/12 | 2018/1/14 | 2018/1/22 | 2018/3/17 | |
| Remark: | ||||||||||||||
| 1.The information above is for tooling fabrication, please carefully check it in order to avoid any mistakes. | ||||||||||||||
| 2.The inner T1 date marked is only available for Longxiang's inner system, the T1 date for customers will be extended | ||||||||||||||
| five days based on our inner T1 date. | ||||||||||||||
| 3.We will treat your approval for all of information above in case we don't get your comments within 3 days. | ||||||||||||||
| Prepared by(编写）: | Joyce Cheng | |||||||||||||
| proofreading(核对）: | ||||||||||||||
| Issued date（动工日期）: | 2018/1/23 | |||||||||||||